Sea of Thieves
Includes Bullseye Mode, Bullseye Sensitivity, Turbo Button, Jump Shot, Strafe Shot, Bunnyhop, Auto Sprint and Hair Triggers.
Last updated
Includes Bullseye Mode, Bullseye Sensitivity, Turbo Button, Jump Shot, Strafe Shot, Bunnyhop, Auto Sprint and Hair Triggers.
Last updated
We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with Sea of Thieves®, and Rare®, or any of its subsidiaries or its affiliates. The official Sea of Thieves website can be found at www.seaofthieves.com/game-info.
The names Sea of Thieves®, and Rare®, as well as related names, marks, emblems, and images, are registered trademarks of their respective owners.
The Sea of Thieves® GamePack features many options including Bullseye Mode, Bullseye Sensitivity, Turbo Button, Jump Shot, Strafe Shot, Bunnyhop, Auto Sprint, and Hair Triggers.
All default button layouts are supported, including Default and Bumper/Trigger Swap. Also includes Default and Swap Stick for Stick Layouts.
This GamePack is split into color-coded categories that make setup and organization easy to follow and understand. We do encourage you to familiarize yourself with these written instructions, it will pay off for you in the long run.
The GCI either pops up every time you program a GamePack to a memory slot or when you click on the memory slot number in Zen Studio. This is a really quick way to setup all your preferred defaults from the get-go.
It's very important that you setup your mouse before trying to use any GamePacks or scripts.
The Zen OLED Menu System is a new groundbreaking feature that allows the configuration and tuning of dozens of different Mod modes and combinations, on-the-fly and in seconds, all from an easy to read OLED interface. Once you have programmed this GamePack to a memory slot it must be enabled and active. This is done by pressing the Memory Slot Button (P1) until the logo of the GamePack you wish to use appears on the OLED screen.
When you see the logo of this GamePack displayed on the screen, simply hold LT/L2 & press MENU/OPTIONS to access the Mod Menu System.
All Adjustable Mods can be tuned and tested in real-time directly from the Zen GamePack OLED Adjustables Menu.
The menu in this GamePack Menu can be navigated by a controller or a keyboard.
The Zen OLED Menu System has built in screensaver protection to help protect against screen burn. It will kick in after 3 minutes of inactivity. Press any button to return to the Mod Menu screen.
Quick Toggles allow you to access the OLED Menu System and instantly enable/disable active Mods while gaming. This gives an incredible advantage in certain situations, for example if you are using a weapon that requires Anti-Recoil to be disabled quickly, or if you are using a fully automatic weapon and need to disable Rapid Fire, simply tap the Quick Toggle designated to the Active Fire Mod.
Note: When a Mod is disabled, any associated Quick Toggle is also disabled.
Quick Toggle
Action
Hold LT/L2 & Hold D-PAD UP
Turbo Button
Hold LT/L2 & Hold D-PAD DOWN
Bunny Hop
Hold LT/L2 & Hold D-PAD LEFT
Bullseye Mode
Hold LT/L2 & Hold D-PAD RIGHT
Active Shot Mod
Hold LT/L2 & Press VIEW/SHARE
Global Kill Switch
These are all of the settings required for the Mods to function correctly, and they also allow you to dramatically improve the quality and accuracy of your character's movement.
Some versions of this game don't have a Bumper/Trigger Swap option, so we included one for you. RB/R1 & LB/L1 becomes RT/R2 & LT/L2.
0
Default
1
Swapped (RB/R1 & LB/L1 becomes RT/R2 & LT/L2)
Some versions of this game don't have a Stick Swap option, so we included one for you. LS/L3 swapped with RS/R3.
0
Default
1
Swapped (LS/L3 swapped with RS/R3)
This option is usually Disabled, however, if you prefer to game with an Inverted Y axis, set the Invert Y to ON
Press the MENU/OPTIONS button on your controller.
Select GAME OPTIONS.
Select SETTINGS.
Select INPUT.
Select INVERT Y.
This option blocks all rumble signals sent from the game but still allows the GamePack to read in-game rumble frequencies which are used by several mods to measure timing.
Press the MENU/OPTIONS button on your controller.
Select GAME OPTIONS.
Select SETTINGS.
Select GAMEPLAY.
Select CONTROLLER VIBRATION INTENSITY and set to MAX.
0
Disabled
Controller WILL receive rumbles
1
Enabled
Controller WILL NOT receive rumbles
Your Aim Sensitivity will be slowed down until you turn the Mod off, this will help to aim finer on longer ranges while having the advantage of a higher sensitivity on other gaming situations.
0
Disabled
Bullseye Mode & Quick Toggle is Disabled
1
Enabled
Bullseye Mode is Enabled
Bullseye Mode Quick Toggle: HOLD LT/L2 + HOLD D-PAD LEFT
You can choose how fine the aiming should get. Fine = slow, Finer = slower, Finest = slowest.
0
Fine
Bullseye Sensitivity is set to Fine
1
Finer
Bullseye Sensitivity is set to Finer
2
Finest
Bullseye Sensitivity is set to Finest
When Turbo Mode is enabled, you can turn virtually any Button into a Turbo Button. This will act like a "Rapid Fire" for the selected Button.
0
Disabled
Turbo Button & Quick Toggle is Disabled
Yes
1
RT/R2
Turbo Button (RT/R2) is Enabled
Yes
2
LT/L2
Turbo Button (LT/L2) is Enabled
Yes
3
RB/R1
Turbo Button (RB/R1) is Enabled
Yes
4
LB/L1
Turbo Button (LB/L1) is Enabled
Yes
5
X/Square
Turbo Button (X/Square) is Enabled
Yes
6
B/Circle
Turbo Button (B/Circle) is Enabled
Yes
7
A/Cross
Turbo Button (A/Cross) is Enabled
Yes
Turbo Button Quick Toggle: HOLD LT/L2 + HOLD D-PAD UP
Select which Shot Mod is active during gameplay. These Mods make you a harder target while confusing the enemy in the process.
0
Disabled
Active Shot Mod & Quick Toggle is Disabled
1
Jump Shot
Jump Shot is Enabled - Jumps while Shooting
2
Strafe Shot
Strafe Shot is Enabled - Strafe while Shooting
Active Shot Mod Quick Toggle: HOLD LT/L2 + PRESS D-PAD RIGHT
Control exactly when a Mod is activated. This is particularly useful if you have one Mod that activates only when you Press Fire and another Mod that activates only when you press ADS & Fire.
0
On Fire
Fire Instantly, ADS Ignored
1
ADS & Fire
Fire While Holding ADS
2
Fire Only
ADS Blocks the Mod
You will jump all the time while pressing and holding the jump button. In some cases you will gain velocity and jump fast forward. Similar like in the game Counter Strike: Global Offensive and the famous but hard to perform Bunny hop [BHOP]. You can also use this to get out of dangerous firefights or from place A to B while being a hard to hit target.
0
Disabled
Bunny Hop & Quick Toggle is Disabled
1
Enabled
Bunny Hop is Enabled
Bunny Hop Quick Toggle: HOLD LT/L2 + HOLD D-PAD DOWN
This category hosts a whole range of incredible mods which are added due to their usefulness and popularity.
If you are tired of constantly pressing the left analog stick to make your character sprint, Auto Sprint is just what you have been looking for, Press Sensitive will make you sprint if left stick is pressed over 90 percent. Even can sprint jump up terrain!
#
Option
Description
0
Disabled
Auto Sprint is Disabled
1
Always On
Always On is Enabled
2
Press Sensitive
Press Sensitive is Enabled when stick is pressed over 90%
3
Sprint Jump
Sprint Jump is Enabled
With this Hair Trigger Mod you can ensure your weapon will 100% full press Fire or ADS at the slightest amount of pressure (10%).
No need to buy expensive "Trigger Stop" add-ons and perfect for all Semi-Auto weapons, especially any Pistol/Handgun/Sidearm.
#
Option
Description
0
Disabled
Hair Trigger is Disabled
1
Enabled
Hair Trigger is Enabled
When this GamePack is being used on a PlayStation 4 or 5 and detects the connected controller is not a DualSense or DualShock 4, it will automatically reassign Touchpad to the Select/Back/View/Minus Button so you are still able to utilize in-game Touchpad functionality on a PlayStation while using a Crossover controller. You can also access the PS5/PS4 Share Screen by pressing Select/Back/View/Minus + RS (Right Stick). If playing on PC with a Playstation controller View/Share and Touchpad are Swapped.
When this GamePack is being used on an Xbox Series X|S and detects the connected controller is not an Xbox Series X|S Controller but a PlayStation controller, it will automatically reassign Share to the Touchpad so you are still able to utilize in-game Share Button functionality on an Xbox Series X|S while using a PlayStation controller.
If you are experiencing unstable performance or settings issues with your GamePack, it's likely that the configuration profile has become corrupted. This can sometimes happen when updating to a newer GamePack version with major structural changes or using a memory slot that already had a pack previously programmed to it.
Sea of Thieves® is a registered trademark or the trademarks of Rare in the United States and/or other countries.
All product names, logos, and brands are the property of their respective owners. All company, product, and service names used on this website are for identification purposes only. Use of these names, logos, and brands does not imply endorsement. In the U.S. and/or other countries. The “PS” Family logo is a registered trademark and “PS4” is a trademark of Sony Computer Entertainment Inc. Microsoft, Xbox One, and the Xbox logos are trademarks of the Microsoft group of companies. Nintendo, Nintendo Switch, and the Nintendo Switch logos are trademarks of Nintendo Inc. Other product names used herein are for identification purposes only and might be trademarks of their respective owners. We disclaim any and all rights to those marks.
GamePack Author: XBL Jedi Compatible Systems: , , & GamePack Community Support: Questions, Help, Requests.... Cronus Zen Private Discord Server Visit the #rules channel
Special thanks to our Community GamePack Team: Batts, x22 DOT, LegitCloudzzz, XBL Jedi & Excalibur.
There are two methods to setup and configure Mods in this GamePack, the first being the and the second is the .
GamePack Default Settings: All default values are optimized for console gaming with a controller. If using Mouse & keyboard, you should expect to have to change almost all default settings to suit your preferred playing style, in particular changing all in-game stick sensitivity settings to maximum.
D-PAD Left, Right, Up Down, A/CROSS to Continue/Enter and B/CIRCLE to go Back/Exit
ARROW Keys Left, Right, Up Down, Return/Enter Key to Continue/Enter and Esc Key to go Back/Exit.
On Fire: Fire while pressing the fire trigger. ADS is ignored. ADS & Fire: Fire while pressing ADS & Fire at the same time. Fire Only: Fire only when pressing the fire trigger. ADS will block the Mod.
Simply go to Device Erase Memory Slots, unplug the Zen mini-USB cable, go to File Relaunch as Admin, reconnect the mini-USB cable to the Zen, and program the GamePack again. You will now find the Mods are working as they should
